AEMC OX 7102 III, User Manual

Page: 157 / 226

HTTP and FTP Server
SCOPIX VIII - 157
2 - ScopeNet
Presentation
All the instrument settings are accessible from the client PC.
For a detailed explanation of the different settings consult the index and refer
to the corresponding chapters.
To access
ScopeNet
using the browser installed on your PC type the
following in the address bar:
http://'Instrument IP address’
. The ScopeNet
applet is then downloaded to the PC and runs in the browser.
The instrument IP address is defined in the following menu:
"UTIL"
Æ
« Config I/O Ports"
Æ
"Network". See p. 95.
Instrument IP
address:
see p. 20
Indication of a channel's settings:
¾
assignment (chX, mathX or memX)
¾
coupling,
¾
type of bandwidth limitation,
¾
channel sensitivity,
¾
vertical scale used for display
Indicates time base settings:
¾
time base,
¾
FFT display,
¾
horizontal scale used for display
Autoset
Access to all scope
settings from the
menu.
The menus are the
same as those on
the instrument.
This icon shows
the instrument
operating mode.
www.
ShopAEMC
.com
Shop for AEMC products online at:
1.877.766.5412