AEMC OX 7102 III, User Manual

Page: 176 / 226

Applications
IX - 176 SCOPIX
Applications (cont’d)
•
Select the trigger mode:
Trig. Menu Automatic mode
or using the SGLE REFR key.
• Use the RUN HOLD key to start acquisition (RUN mode)
or use the time base menu.
Reminder
The acquisition status (Ready, RUN, STOP) is indicated on the right, under
the display of the trace, in the trigger status display zone.
• Optimize the time base speed to observe several complete TV lines.
Example of a video signal
Use the manual cursors to check the duration of a line.
• Display the manual cursors:
Menu Measure Manual measurements (dt, dv)
or using the key
opposite.
• To move the cursors freely, select:
Measure Menu Unattached cursors.
• Use the stylus to position cursors 1 and 2 on the start and end of the
signal, respectively.
The measurements between the 2 cursors are indicated under the curve
display.
Example: dt = 64.00 µs = duration of a line
www.
ShopAEMC
.com
Shop for AEMC products online at:
1.877.766.5412