Technical Specifications
X - 200
SCOPIX
Technical Specifications
« Oscilloscope » Function
Only the values assigned with a tolerance or limits are guaranteed
values (after half an hour warming up). Values without a tolerance
are for information only.
Vertical deviation
Characteristics
OX 7102
III
OX 7104
III
OX 7202
III
OX 7204
III
Number of
channels
4 channels : CH1 to CH4
(
OX 7x04
)
2 channels : CH1 & CH4
(
OX 7x02
)
Vertical
ranges
2.5 mV to 200 V/div.
Variation in steps (no continuous variable coefficient)
BP
1
at -3 dB
200 MHz
Measured on 50
Ω
load with a 6 div. amplitude signal
Max. input
voltage
without
accessories
600 VDC, 600 Vrms, 850 Vpk (DC + peak AC at 1 kHz) without 1/10 probe
1 kVrms with
Probix
HX0030 probe
derating -20 dB/decade from 100 kHz to 200 MHz
Input
type
Probix
safety connector: class 2, insulated inputs
Vertical
offset
dynamic
± 10 divisions on all ranges
Input coupling
AC
DC
GND
10 Hz to 100 MHz
0 to 100 MHz
reference
10 Hz to 200 MHz
0 to 200 MHz
reference
Bandwidth
limit
at
≈
15 MHz, 1.5 MHz, 5 kHz
Rise time
on all vertical ranges
2.5 mV to 200 V/div.
≈
3,5 ns
≈
1,9 ns
Cross-talk
between channels
> 70 dB
Same sensitivity on both channels
Response
to rectangular
signals: 1 kHz and 1 MHz
Positive or negative overshoot
Overshoot :
≤
4 %
Vertical
resolution
of the display
± 0.4 % of full scale (without ZOOM)
0.025 % in ZOOM mode (12 bits)
Peak-to-peak
gain
accuracy
± 2 % with x4 averaging at 1 kHz
Accuracy
of vertical DC
measurements with offset and
averaging of 16
± [2,2 % (reading) + 11% (sensitivity) + 250
μ
V]
applies to :
Vmin., Vmax., Vhigh, Vlow, Vavg., curs(1), curs(2)
Accuracy
of vertical AC
measurements without offset
at 1 kHz and averaging of 16
± [2 % (reading) + 1% (sensitivity)]
applies to :
Vamp, Veff, Over+, Over-
Resolution
of measurements
12 bits
Accuracy
of vertical offset
± [0.2 % (reading) + 10% (sensitivity) + 250
μ
V]
Vertical
ZOOM
function on saved
or acquired trace
ZOOM factor : 16 max.
Electrical
safety
without accessories
600 V, CAT III, double insulated
Max.
voltages
(not for accessories)
floating: 600 V, CAT III, from 50 to 400 Hz
between channels : 600 V, CAT III, from 50 to 400 Hz
Input
impedance
1 M
Ω
± 0,5 % ca.12 pF
1
Beyond 1 V/div. BW is guaranteed by the rise time
www.
ShopAEMC
.com
Shop for AEMC products online at:
1.877.766.5412
Summary of Contents for OX 7102 III
Page 117: ...Multimeter Mode SCOPIX V 117 www ShopAEMC com Shop for AEMC products online at 1 877 766 5412...
Page 155: ...Recorder Mode SCOPIX VII 155 www ShopAEMC com Shop for AEMC products online at 1 877 766 5412...
Page 199: ...Applications SCOPIX IX 199 www ShopAEMC com Shop for AEMC products online at 1 877 766 5412...
