AEMC OX 7102 III, User Manual

Page: 130 / 226

Recorder Mode - Keys
VII - 130 SCOPIX
Recorder Mode (cont’d)
5 "VERTICAL" keys
(or keypads)
OX 7xx4
OX 7xx2
or
Deselecting the signal: 2 short taps on the key concerned (see opposite).
A long press does not trigger a vertical autoset. After a long press the
message: “Impossible in this mode!” appears.
This key enables or disables the
horizontal dividing into 2 parts
of the
display area (see “Oscilloscope” mode).
No action.
(Pressing the key displays the message: “Impossible in this mode!”).
In “Recorder” mode, the DC input coupling is constant. The DC symbol
is permanently displayed.
To set the vertical
sensitivity
of the last channel selected (see “Oscilloscope”
mode).
To set the vertical
position
of the last channel selected (see “Oscilloscope”
mode).
Stage 1 Stage 2 Stage 3
Before
pressing one of the
keys shown opposite:
After
pressing one of these
keys:
The signal concerned is not
displayed.
The signal is displayed and
selected.
The vertical sensitivity and
vertical position are allocated
to the selected channel.
The signal concerned is
displayed but not selected.
The signal concerned is
displayed and selected.
Press
The signal is erased by
double pressing.
Stage 1 Stage 2 Stage 3
Before
pressing one of the
keys shown opposite:
After
pressing one of these
keys:
The signal concerned is not
displayed.
The signal is displayed and is
selected.
On CH1 and CH4, the vertical
sensitivity and vertical position
are allocated to the selected
channel.
The signal concerned is
displayed, but not selected.
The signal concerned is
displayed and selected.
Press
The signal is erased by
double pressing.
www.
ShopAEMC
.com
Shop for AEMC products online at:
1.877.766.5412