AEMC OX 7102 III, User Manual

Page: 184 / 226

Applications
IX - 184 SCOPIX
Applications (cont’d)
Example of
measurement in
Multimeter Mode
The graphic window records the changes in the measurements during the
analysis period (5 minutes).
The bargraph shows the amplitude of the variations.
The minimum value (49.9 ohms) and the maximum value (550.5 Ohms)
measured are indicated in the CH1 parameter display.
The cursor linked to the trace indicates the measurement a specific point on
the trace, along with the time of the event.
The value measured which is displayed in the CH1 parameter display
remains active after the analysis period has ended.
13. Measurement in
“Recorder” mode
Example
: Monitoring of temperature variation of a soldering iron
Analysis of iron
heating
Using the key shown
opposite
, select the "Recorder" mode.
Connect the
Probix
adapter of an
HX0035
K Thermocouple probe to input
CH1.
A message showing the characteristics of the probe is displayed briefly
the probe has been detected:
www.
ShopAEMC
.com
Shop for AEMC products online at:
1.877.766.5412