AEMC OX 7102 III, User Manual

Page: 167 / 226

HTTP and FTP Server
SCOPIX VIII - 167
3 - ScopeAdmin
ScopeAdmin
It is a utility for supervising a set of
METRIX
instruments that support a
specific communications protocol.
It is an applet that must be run on an instrument server client machine (PC or
other).
The only instrument on which the IP address must be predefined is the
instrument on which your PC will connect to download the applet. The IP
address of the other instruments to be managed can be defined using
ScopeAdmin
.
The supervision consists in adjusting the different machine configuration
settings:
- the IP parameters,
- the print settings,
- the configuration settings (language, standby ...).
Using
ScopeAdmin
you can send a message to all connected instruments or
to a specific instrument; the message is displayed on the instruments' screen.
You can also prohibit access to the configuration settings using the front face
of the instrument and put the connected instruments on standby or stop them.
To access
ScopeAdmin
from the browser installed on your PC type the
following in the address bar:
http://Instrument IP address/ScopeAdmin.html
.
A username and password are requested:
User: admin
Password: admetri*
The ScopeNet applet is then downloaded to the PC and runs in the
browser.
Click on
'Find Instruments’
to explore your
network and display
all connected
instruments that
support ScopeAdmin.
www.
ShopAEMC
.com
Shop for AEMC products online at:
1.877.766.5412