AEMC OX 7102 III, User Manual

Page: 23 / 226

Micro SD Memory Card
SCOPIX II - 23
Micro SD Memory Card
Introduction
The internal memory of the oscilloscope (2MB) may be extended by using
an SD Card (128MB - 2GB).
The oscilloscope accepts the Micro-SD format (but not Micro-SDHC).
FAT32 format is not compatible with the oscilloscope.
Installation
Location
The SD Card compartment is located on the right-hand side of the
oscilloscope near the communications interface connector.
Insertion/Extraction
-
Insert the SD Card, in the card compartment, printed surface facing up.
-
Push to the click
Æ
the card is in position.
-
To remove the card, press slightly on the card itself and support it while
removing.
Operation
Recording
a file
• The filename is limited to a maximum of 20 char extension.
If this rule is not observed, the message: 'Filename too long’ is displayed.
• If the name already exists or is incompatible, an error message
‘Impossible! File already exists' will be displayed.
• By moving the pointer onto the names of the files, you will see their
characteristics displayed (date and time saved and size).
www.
ShopAEMC
.com
Shop for AEMC products online at:
1.877.766.5412