AEMC OX 7102 III, User Manual

Page: 150 / 226

Recorder Mode - The “Memory” Menu
VII - 150 SCOPIX
Recorder Mode (cont’d)
‘.TXT’ save
Identical to “Oscilloscope” mode (see §. Memory Menu Trace Save ‘.TXT’).
In this mode, traces are saved individually.
Recall ‘.REC’
Opens a "File Copy" menu when selected.
In the "Source" list, the previously saved .REC files (via the menu "Trace
Save.REC") are displayed.
The file name to recall is highlighted. It is selected using the stylus.
Once it has been selected, the key opens the file and closes the menu.
The menu can be exited without recalling by tapping the icon in the top right-
hand corner with the stylus.
•
It is impossible to launch an acquisition or deselect a channel while the
recorder is in memory display mode
.
•
It is not possible to switch from a normal acquisition to a fault capture while the
recorder is in memory display mode.
•
This symbol – which is in the bottom right-hand corner of the screen – is a
reminder that the recorder is in memory display mode.
•
The “ ” symbol in front of Recall ‘.REC’ in the Memory menu is a reminder that
the recorder is in memory display mode.
•
When a .REC file is recalled, the symbol “Mx” is displayed in the parameters of
all the traces.
•
The virtual keyboard cannot be used in this menu.
•
To exit memory display mode, deselect Recall ‘.REC’ in the Memory menu by
tapping it with the stylus.
Example
Mx symbol:
all the traces come
from the memory.
Acquisition
impossible in
memory display
mode.
Saving a ‘.REC’ acquisition:
Enter the filename.
Then click on
to validate the save.
Recall ‘.REC’: Select the file to recall.
Then click on
to validate your
choice.
The symbol
M
is a reminder
that the recorder er is in
memory display mode.
M
To deactivate the memory
display, deselect recall
‘.REC’ with the stylus
.
www.
ShopAEMC
.com
Shop for AEMC products online at:
1.877.766.5412