AEMC OX 7102 III, User Manual

Page: 48 / 226

Oscilloscope Mode - Display
IV - 48 SCOPIX
Oscilloscope Mode (cont'd)
1. Status area
Bargraph
Permanent settings
Cursor
measurements
Three types of general information appear in this area:
•
The
bargraph
representing the screen position, the trigger and the
cursors in the acquisition memory.
•
The instrument permanent
settings
.
•
The
measurements
, when the cursors are present on the screen.
Each element in the bargraph can be moved with the stylus.
This zone refers to the trigger status (mode, edge, source, current status).
Example
: AUTO 1 STOP
When the stylus is placed on this information, the "Trigger Parameters"
menu can be opened by pressing twice.
This zone refers either to:
•
the horizontal (dt) and vertical (dv) differences between 2 cursors in the
case of manual measurements
Example
:
(1) dt = 110.0 µs, div = 100.0 µV
•
phase measurement in the case of manual phase measurement (Ph).
Example
: (1) Ph = 200.0°
•
the automatic measurements selected using the "Automatic
Measurements" or "Phase measurement" menus
Example: (2) F = 1.0000 kHz, Vpp = 7500 V
(1)dt=110,0µs, div=100.0µV
Trig 1 Pretrig
Position and movement
of time trigger
Position and movement of
manual cursors
Movement towards left of
screen in acquisition
memory
Movement towards right of
screen in acquisition
memory
Permanent settings
Cursor measurements
Representation and
movement of the screen in
acquisition memory
T 1 2
www.
ShopAEMC
.com
Shop for AEMC products online at:
1.877.766.5412