AEMC OX 7102 III, User Manual

Page: 135 / 226

Recorder Mode - Display
SCOPIX VII - 135
Recorder Mode (cont.)
3. Display area
Graphic elements displayed associated with the traces in this area:
•
Vertical position indicator for the reference level of each trace
•
ZOOM area selection.
•
Main cursor (permanent, moved using stylus) located at the left of the screen
by default.
•
Auxiliary cursor (permanent, moved using stylus) located at the right of the
screen by default.
•
Trigger time position indicator (fixed and located 20% across from the left of
the screen).
Its graphical representation is as follows :
Level indicators representing 5 different triggers:
- “
Lower
trigger” option (of the last channel selected).
- “
Upper
trigger” option (of the last channel selected).
- “
Upper/lower
trigger” option (of the last channel
selected).
- “
External
window trigger” option (of the last channel
selected).
- No symbol is displayed:
no trigger
(on the last
channel selected).
The level indicator figure represents the channel concerned by this
indicator:
Example
- Lower trigger option on channel 1.
There can be trigger conditions on several
channels at the same time: display by selecting the
channel concerned.
In fault capture mode, the grid is divided into ten sections; i.e. one section
for each fault.
The cursors are no longer displayed: they reappear when a single fault is
displayed on the screen (horizontal zoom enabled: see help for key shown
here).
1
1
1
1
1
1
www.
ShopAEMC
.com
Shop for AEMC products online at:
1.877.766.5412