AEMC OX 7102 III, User Manual

Page: 98 / 226

Oscilloscope Mode - The "Utilities" Menu
IV - 98 SCOPIX
Oscilloscope Mode (cont'd)
System info
Display of data concerning the operation of the instrument since it was first
used.
Autotest
This list displays the result of the self-test activated when the instrument is
switched on.
For verification of the instrument, see §. Maintenance p. 6.
Touch screen
calibration
The touch screen needs to be calibrated if the position of the mouse pointer
is offset from the stylus impact point on the touch screen or if access to x
different objects on the screen is difficult.
This calibration process is described on p. 52, 53.
"Advanced" mode
The "Advanced" mode gives access to certain additional functions. By
default the "Advanced" mode is not activated in order to simplify the use of
the equipment.
Functions available in
"Advanced" mode only
Function
Accessed from
the menu
Selection in
advanced
mode
State in non
advanced
mode
(default
configuration)
math1, math2,
math3, math4
"Vert"
Complex
mathematical
functions
applicable to the
4 traces
Simple
mathematical
functions
applicable only
to traces 2 and 3
Repetitive signal
"Horiz"
Choice between
repetitive and
non repetitive
mode
Non repetitive
mode
Average
"Horiz"
No averaging.,
x2, x4, x16, x64
No averaging
XY
"Display"
Choice between
Oscilloscope
(YT) and XY
Oscilloscope
(YT)
Free manual
cursors
"Measure"
Manual cursors
whether related
or not to the
reference trace
Cursors 1 and 2
related to the
reference trace
Access to FTP
server
“Memory”
Option that
can be selected
Option that
cannot be
selected
(grayed)
• The " " symbol indicates that "Advanced" mode is enabled.
• The stylus can be used to modify this.
• By default, "Advanced" mode is not enabled.
•
In "Advanced" mode, the instrument starts in the configuration where it
stopped; otherwise it starts in its default configuration (always the
same one).
www.
ShopAEMC
.com
Shop for AEMC products online at:
1.877.766.5412