AEMC OX 7102 III, User Manual

Page: 6 / 226

General Instructions
I - 6 SCOPIX
General Instructions (cont'd)
Warranty
This equipment is guaranteed for
3 years
against any defect in materials or
workmanship, in accordance with the general terms and conditions of sale.
During this period, the equipment can only be repaired by the manufacturer
.
The manufacturer reserves the right to carry out repair or replacement of
all or part of the equipment. If the equipment is returned to the
manufacturer, initial transport costs shall be borne by the customer.
The
warranty
does not apply following:
•
unsuitable use of the equipment or use with other incompatible
equipment
•
modification of the equipment without explicit authorization from the
manufacturer’s technical services
•
repair carried out by a person not certified by the manufacturer
•
adaptation to a specific application, not provided for in the definition of
the equipment or by the operating manual
•
an impact, a fall or a flooding.
Maintenance and
metrological
verification
Before the equipment is opened
,
it must be disconnected from the mains
supply and the measurement circuits, and the operator must not become
charged with any static electricity. This could cause the destruction of
internal parts.
Any adjustment, servicing or repair of the unit
under power
must be
undertaken only by qualified personnel, after reading the instructions in this
manual.
A
qualified person
is a person who is familiar with the installation, its
construction, its use and the hazards that exist. They are authorized to
activate and deactivate the installation and equipment, in compliance with
the safety instructions.
As for all surveying equipment, yearly metrological checks are necessary.
These checks can also be done as part of preventative maintenance.
Information and contact details : contact your nearest distributor.
Unpacking -
Repacking
All the equipment was verified mechanically and electrically before
shipping.
When you receive it, carry out a quick check to detect any damage that
may have occurred during transport. If necessary, contact our sales
department immediately and register any legal reservations with the carrier.
In the event of reshipping, it is preferable to use the original package.
Indicate the reasons for the return as clearly as possible in a note attached
to the equipment.
Repair
For all repairs before or after expiration of warranty, please return the
device to your distributor.
www.
ShopAEMC
.com
Shop for AEMC products online at:
1.877.766.5412