Adtech 4 Series, Maintenance Manual

Page: 96 / 155

ADTECH 4 series CNC System (maintainance Manual)
92
004
005
006
Initialize
Initialize IO Config
all para reset<
●
>
007
008
para backup
para recover
009 generate cryptogram
entering successfully;
In the new menu, press the Insert key to exit the admin mode. To modify
the parameter table at this moment, you need to enter the admin mode
again;
The super user can modify all passwords, while the operation user only
can modify the own password.
The default password is 0 and 1
Range : none
Unit : none
Authority : Ssuper mode
Default : none
Effective time : instant
Note : At super mode ,you can reset the parameters to default value
Range : none
Unit : none
Authority : Super mode
Default : none
Effective time : instant
Note :
The parameters can be backed up and restored only in super
user mode
The parameters are backed up to the sysconf.bak file in the root
directory of the controller. If this folder already has a file with same
name, the latest backup will overwrite this file.
The sysconf.bak file in the root directory is also used for restoring.
During restoring, it will check whether the parameter versions are same
according to the backed up parameter version; if not, the system won‘t
restore the parameter table.
After restoring, the system will reboot automatically.
Range : none