Adtech 4 Series, Maintenance Manual

Page: 18 / 155

ADTECH 4 series CNC System (maintainance Manual)
14
⑶
Rotate the increment switch on the handwheel to select the moving amount (0.1, 0.01, 0.001);
⑷
Rotate the handwheel to move the machine. The tool moves certain distance acoording to the
handwheel scale setting. (For example, if you select X axis in step
⑵
and select 0.01 in step
⑶
, the tool moves
0.01mm every scale). Rotate the handwheel continuously to move each axis continuously.
Note
The MPG mode controls only one axis every time; the faster the handwheel rotates, the faster the machine tool moves.
4.5 Manual auxiliary function operation
Coolant on/off
at MPG/step/Jog mode, press this key to switch on/off the coolant.
Key indicator: No matter in what mode, the key indicator is on if only the coolant is on, or else the
indicator is off.
Lubricant on/off
at MPG/step/Jog mode, press this key to switch on/off the lubricant.
Key indicator: No matter in what mode, the key indicator is on if only the lubricant is on, or else the
indicator is off.
Spindle CW/stop
In at MPG/step/Jog mode, press this key to rotate the spindle cw and press it again to stop
Key indicator: No matter in what mode, the key indicator is on if only the principal axis is positive
rotating, or else the indicator is off.
Spindle CCW/stop
In at MPG/step/Jog mode, press this key to rotate the spindle ccw and press it again to stop
Key indicator: No matter in what mode, the key indicator is on if only the principal axis is reverse
rotating, or else the indicator is off.