Adtech 4 Series, Maintenance Manual

Page: 50 / 155

ADTECH 4 series CNC System (maintainance Manual)
46
10.
System maintenance
10.1 Retoot
1) In the main menu, press [PROG]
2) Press [File]
3) Press [Reset] and the system asks whether reboot or not;
4) Press [EOB] to reboot the system.
10.2 System upgrade
The step of copying upgrade program with USB disk(flash drive) as follows:
1) In the main menu, press [PROG]
2) Press [File] to enter the file management interface;
3) Insert the USB disk, select the [data traveler] symbol in the root directory; after reading successfully,
the system enters the USB directory automatically;
4) Move cursor to the upgrade file ADTROM.BIN, select [Copy], press [file] again,find [local d] ,press
[EOB],enter ADT folder and paste;
5)
Select the second upgrade file NC_RES.NC; skip this step if the file doesn‘t exist. Also select Copy,
press [file] again, find [local d] ,press [EOB],enter ADT folder and paste
6) After that, reboot controller ,and press CAN button(hold 3s),then release ,input password 26722719
7) select 1—BIOS set,in the mext interface ,press 1---prog sec , it will show ―are you sure ?[y/n]‘,then
press Y,it will show program success,reboot
8) Enter System Info in Diagnosis menu to view the system version and compilation date, and check
whether the upgrade is successful.
10.3 Reset parameters to default value
1) Select the edit mode;
2) In the main menu, press [Para],Press [Manage]
3)
Move cursor to ―006 all prameter reset‖;]
4) Press [EOB], the system confirms, reset the default parameters and reboots automatically.
10.4 Parameter backup and recover
Select the edit mode;
1) In the main menu, press [Para]