Adtech 4 Series, Maintenance Manual

Page: 84 / 155

ADTECH 4 series CNC System (maintainance Manual)
80
Range : 0
～
9999
Unit : Mm/min
Authority : Operation admin or higher
Default : 1000
Effective time : Instant
Note : Set the Jog speed of each axis ,the start speed is the P2.003 setting ,and
the Accis the P2.004 setting
Range : 1
～
9000
Unit :
Authority : Operation admin or higher
Default : 9000
Effective time : Instant
Note : At the pretreatment mode,these setting for setting every axis restrain Acc
If Any of these setting is too small ,the working process speed will be
slow ,so the larger the setting is, the higher processing speed is.
as the machine working condition ,these settings are as lager as possible
if the parameter P1.018 setting is speed or speed 1 ,then this parameter is
invalid .
013 X_ServoAlarmIn ELevel
Y_ServoAlarmIn ELevel
X restrain acc (mm/s^2)
Y restrain acc (mm/s^2)
Z restrain acc (mm/s^2)
4 restrain acc (mm/s^2)
B restrain acc (mm/s^2)
C restrain acc (mm/s^2)
X max restrain rate
Y max restrain rate
Z max restrain rate
4 max restrain rate
B max restrain rate
C max restrain rate
011
012
Z axis JOG speed(mm/min)
A axis JOG speed(mm/min)
B axis JOG speed(mm/min)
C axis JOG speed(mm/min)