Adtech 4 Series, Maintenance Manual

Page: 79 / 155

ADTECH 4 series CNC System (maintainance Manual)
75
062 Hand wheel control mode
063 Hand wheel max rate
001 X Gear Numerator
X Gear Denominator
Effective time : Instant
Note :
If the handwheel direction is reverse ,you change this parameter
0 is positive direction
1 is negetive direction
Range : 0--1
Unit : none
Authority : Operation admin or higher
Default : 0
Effective time : Instant
Note :
For setting the axis motion mde when contrlled by handwheel
0 is old mde 1 is new mode
Range : 500---10000
Unit : none
Authority : Operation admin or higher
Default : 4000
Effective time : Instant
Note :
For setting the handwheel max speed rate(it is valid only when the
P1.062 setting is 1)
Range : 1---20
Unit : none
Authority : Operation admin or higher
Default : 10
Effective time : Instant
Note :
For setting the handwheel max speed Acc( it is valid only when the
P1.062 setting is 1)
Range : Off/on
Unit : none
Authority : Operation admin or higher
Default : off
Effective time : Instant
Note :
After controller complete working ,the machine go to the reference
position (press coord ----- down )
11.3 Axis parameter configuration (P2.)
Hand wheel ACC(Kps) 064
065 Machine end to reference