Adtech 4 Series, Maintenance Manual

Page: 104 / 155

ADTECH 4 series CNC System (maintainance Manual)
100
Spi Open Delay time(ms)
Servo spindle ready level
Servo spi stop pos level
Servo spi zero speed level
Sv spi speed reach level
Sys current speed
Denominator
Unit :
Authority : Operation admin or higher
Default : 1
Effective time : instant
Note : If the spinde installed with gear ratio ,pls input the gear ratio value to
these parameters ,noramlly ,these parameters are invalid ,but maybe it is
used for certain special application
Range : 0
～
10000
Unit :
Authority : Operation admin or higher
Default : 0
Effective time : instant
Note : After spindle start running ,there is a delay for spindle getting the speed
then work the next codes.
Range : 0
～
1
Unit :
Authority : Operation admin or higher
Default : 0
Effective time : instant
Note : These signals are used for ATC function ,pls refer the servo spindle user
manual and set the signal level
Range : 1
～
24000
Unit : RPM/MIN
Authority : Operation admin or higher
Default : 6000
Effective time : instant
Note : Set the spindle speed
Range : 0
～
1
026
027
028
029
030
031
032 M30 close spi En