Adtech 4 Series, Maintenance Manual

Page: 47 / 155

ADTECH 4 series CNC System (maintainance Manual)
43
⑴
home offset
➢
The home offset is added to current machine coordinates when setting the coordinate system; this
parameter setting is available in next tool setting;
➢
The application of this parameter is for the processing of certain parts that require several working
procedures. The first processing procedure may damage the tool setting position of the workpiece,
and the next procedure can‘t locate the proper tool setting position. Therefore, a reference tool
setting point is required, and the offset from reference point to actual tool setting position can be set
to this parameter. No matter tool setting in which procedure, you only need to set to this reference
point and it is same like setting to home position of the workpiece.
⑵
tool setting gauge, effective signal, automatic tool setting, machine tool Z negative limit of tool setting
gauge:
➢
The X, Y coordinates are the mechanical coordinates of the t tool setting gauge on machine; tool
setting gauge can position automatically only when the coordinate is set properly.
➢
Effective voltage level of tool setting gauge is for setting the signal interface level of tool setting
gauge, which should be set according to the actual interface of the tool setting gauge
➢
Automatic tool setting after tool changing is that the tool setting gauge function executes
automatically after tool change instruction
12
13
14
15
16
17
18
19
….
33
Tool checking limit x
To Tool checking limit y
Tool checkinglimit z
Tool checking limit A
Tool checking Dir x
Tool checking Dir y
Tool checking Dir z
Tool checking Dir A
…….
Tool set mode(0—Nos.1 Tis base ,1—not base)