Adtech 4 Series, Maintenance Manual

Page: 105 / 155

ADTECH 4 series CNC System (maintainance Manual)
101
Second spi speed
033 Spi Minimum speed
Unit :
Authority : Operation admin or higher
Default : 0
Effective time : instant
Note :
0 : when the controller execute M30 code ,the spindle don‘t stop
1: when the controller execute M30 code ,the spindle stop immediately
Range : 100 ~ 100000
Unit : RPM/MIN
Authority : Operation admin or higher
Default : 100
Effective time : instant
Note : Set spinde the Min speed
Range : 1 ~ 100000
Unit : RPM/MIN
Authority : Operation admin or higher
Default : 24000
Effective time : instant
Note : There are two aalong outputs port for spindle ,set the 2nd spindle the Max
speed
Range : 1 ~ 24000
Unit : RPM/MIN
Authority : Operation admin or higher
Default : 24000
Effective time : instant
Note : set the 2nd spindle the speed
Range : OFF/ ON
Unit :
Authority : Operation admin or higher
Default : Off
Effective time : instant
Note : ON: when execute M03 s**** ,the s value is invalid .the spindle works
as the speed of P5.031 setting
034 Second spi Maximum speed
035
036 Spi code command invalid