Adtech 4 Series, Maintenance Manual

Page: 107 / 155

ADTECH 4 series CNC System (maintainance Manual)
103
053
054
055
IO Conf Reset 00--31
IO Conf Reset 32--63
IO Conf Reset 64--95
056
057
058
Led Reset 0--31
Led Reset 32--63
Led Reset 64--95
Range : 0x00000000
～
0xFFFFFFFF
Unit :
Authority : Operation admin or higher
Default : 0
Effective time : instant
Note : Used for setting the IO diagnosis level ,0 is low level ,1 is high level
Adopt binary system to configurating the input port level
For example , P6.050: 10 , then the binary dihgit is 00000000
00000000 00000000 00001010
；
That means in the IN32 ~ IN6 input ports ,the IN33 IN35 diagnosis
level is high level ,and others are low level
Range : 0x00000000
～
0xFFFFFFFF
Unit :
Authority : Operation admin or higher
Default : 0
Effective time : instant
Note : Used for closing the outputs when reset alarm
0 :keep before status 1: close this output
For example , P6.053: 10 , then the binary dihgit is 00000000 00000000
00000000 00001010
；
That means when press ―RESET‖ buuton to reset the alarm ,the output
OUT33 OUT35 will be closed ,and others output will keep before status
Range : 0x00000000
～
0xFFFFFFFF
Unit :
Authority : Operation admin or higher
Default : 0
Effective time : instant
Note : Used for closing panel LED outputs when reset alarm
0 :keep before status 1: close this output
Input check level 64--95 052