Adtech 4 Series, Maintenance Manual

Page: 38 / 155

ADTECH 4 series CNC System (maintainance Manual)
34
[Diag]
Sys info
System info interface
Program Edit Interface
The system info is a summary of the program blocks in current processing area, and calculates the
resource usage in current work area. The upper right of the program directory interface shows the version info
of current controller software.
To enter system info interface:
System info interface is shown below:
System Info Interface
9.3 MDI interface
MDI mode is mainly used for the execution of single G code in certain occasions.
To enter MDI interface:
In MDI interface, enter complete NC code instruction in edit mode, press the [Start] key in the edit mode
and confirm to execute directly.
To restore the default settings quickly, press and hold the [Reset] key for three seconds and choose to
reset or not.
MDI interaction interface is shown below:
[Monitor]
[MDI]