Adtech 4 Series, Maintenance Manual

Page: 36 / 155

ADTECH 4 series CNC System (maintainance Manual)
32
Relative position
In Jog mode, reset current coordinates to check the relative motion distance of any displacement, and thus
it is called as relative position.
This interface is usually used for early tool setting. Considering that some operators have been used to
manual calculation, this function is preserved. With the more and more powerful of automatic centered
function, it is used less.
The operation as follows:
Enter [Pos] interface;
Switch to [Rele] interface;
Then, enter Jog mode;
Press a coordinate axis No., e.g., ‗X‘, and the X coordinate flashes;
Press ―Cancel‖ to reset X coordinate to 0;
The relative position interface as follows:
Relative Position Interface
General (All) coordinates
The interface displayed by absolute coordinates and machine coordinate
General position interface is shown as below: