Adtech 4 Series, Maintenance Manual

Page: 78 / 155

ADTECH 4 series CNC System (maintainance Manual)
74
057 System boot zero way
060 4 axis max rotate speed
If it is OFF ,it will not jump when excute M98 code
Range : Non RZ/ Prompt RZ / Auto RZ
Unit :
Authority : Operation admin or higher
Default : Non RZ
Effective time : Instant
Note :
Non RZ: after power on controller ,it will keep the last system
coordinate
Prompt RZ: after power on controller ,it will show message that remind
u return zero or not ,if press EOB,it will return zero,if press cancel ,it will
keep the last system coordinate
Auto RZ: after after power on controller,it will return zero automatic
Range : 0---3922
Unit : ms
Authority : Operation admin or higher
Default : 0
Effective time : Instant
Note :
after the spindle stop working , the controller has a delay and output a
signal to Make the spindle brake signal inactive
Range :
Unit :
Authority : Operation admin or higher
Default : 0
Effective time : Instant
Note :
This parameter is invalid now ,so no need set it
Range : 1--500
Unit :
Authority : Operation admin or higher
Default : 50
Effective time : Instant
Note :
If the P1.018 setting is angle ,then this setting for setting the max speed
of A axis(when theA axis is rotary ,not linear )
Range : 0--1
Unit : none
Authority : Operation admin or higher
Default : 0
Rotation axis opt feature 059
Spi brake deay(ms) 058
061 Hand wheel encoder dir