Adtech 4 Series, Maintenance Manual

Page: 71 / 155

ADTECH 4 series CNC System (maintainance Manual)
67
019
GCode pre-treatment
Note :
Set the tool retracting amount Q value in G73 and G83 instructions; this
parameter (default: 2mm) is set according to actual chip removal effect.
Range : Pos split / time split
Unit :
Authority : Operation admin or higher
Default : Pos split
Effective time : Instant
Note :
Set the Arc interpolation mode ,pos split :when excute pretreatment,the
controller excute program with small lines ; time split: :when excute
pretreatment,the controller excute program with time (4s per period)
Range : Angle / Speed / Speed1
Unit : None
Authority : Operation admin or higher
Default : Speed1
Effective time : Instant
Note
:
At pretreatment mode, if the setting is Angel,that means the
controller works as The corner speed balancing algorithm; if it is
speed ,it works
as axis acceleration balancing algorithm; if it is
speed1 ,it works as high effcient acceleration balancing algorithm.
Range : Real time /Preprocesss
Unit : None
Authority : Operation admin or higher
Default : real time
Effective time : Instant
Note :
Real-time processing is suitable for machine debug
In pretreatment mode, after controller start working ,there are 2s for
buffering and pre-reads. For The pretreatment ,the controller can check
the direction and size of feeding segment to adjust the speed
automatically and get an optimized speed.
Range : 0~1
Unit : None
Authority : Operation admin or higher
Default : 1
Effective time : Instant
Note :
File scanning can quicken the file transfer speed when processing large
files.
When transferring NC files, the system needs to scan over to position
every program block. In this way, if the file only has one program
segment and the file size is very big, it will cause unnecessary waiting
time. If this option is closed, the system will exit after scanning the
address of first program segment
'O'Pro Scan
020
interpolation speed mode
018
Arc Inp Mode
017