Adtech 4 Series, Maintenance Manual, Page: 145 / 155

ADTECH 4 series CNC System (maintainance Manual)
141
choose a tool nearby for disc tool magazine, for each selection ,the +or – direction rotate will not exceed 180°,
short time and high efficiency.
(37)#1=0 (symbol for tool disc +or- rotate, #=1 is +, and #=0 is -) the default value is #=1
(38)IF[#201 > [#400/2]] GOTO 1
(if the current tool NO. is in lower half of tool magazine,the program will jump to N1)???
(39)IF[[#201 >= #200] || [#200 > [#201+[#400/2]]]] GOTO 2
(39) code is use for below type of tool magazine)
The current tool NO. is bigger than target tool number or target tool located at lower half of tool magazine, for
example, the max tool number is 24, current tool NO. is 1, target tool NO.is 16, the nearest path is: No 1—>No
24
→
-No 23...No 16
forward rotate choose tool
(40)M89 P9 L1
(disc CW output : P9 is disc CW output signal..nearby tool changing : if current tool NO. is 3 and target tool
NO. is 4, disc CW)
(41)#1=0 (symbol is 0, tool selection of disc CW)
(42)GOTO 3 jump to N3
(43)
N2 tool seletion of ccw
(44)
M89 P10 L1 ( disc ccw output )
(45)
#1=1 (symbol is 1, tool selection of disc CCW)
(46)
GOTO 3 jump to N3
(47)
N1
(48)IF[[#201 >= #200 && #200 <= #400] && [#200 > [#201+#400/2]MOD#400]] GOTO 4