Acom M47 User Manual Download Page 113

Page: 113 / 136

M47 User’s Guide - Page 113

CautIoNs oN HaNdlING tHE dRum/toNER CaRtRIdGE

When handling the drum/toner cartridge, take note of the Do not subject it
to direct sunlight or strong light.

•

When installing the drum/toner cartridge, select a location away from
strong light and try to finish the installation within 5 minutes.

•

Do not touch the surface of the photosensitive drum. Do not let the
drum/toner cartridge stand or place it upside down. The drum might be
damaged.

•

A drum shutter protects the photosensitive drum from light. Do not open
the drum shutter.

•

Although the toner is not harmful to the body, wash it off with cool water
immediately if your hands or clothes are stained with it.

•

It is recommended to use the drum/toner cartridge within 1 year after
opening it.

Replacing the Drum/Toner Cartridge

1. If the optional offset catch tray is installed, lift it out of the way.

2. Turn the printer off.

Summary of Contents for M47









































































































































Search results

Summary of Contents for M47

Reviews:

Related manuals for M47

Brands by name

Popular brands

Acom M47, User Manual

Search results

Summary of Contents for M47

Reviews:

Related manuals for M47

Brands by name

Popular brands