Acom M47 User Manual Download Page 100

Page: 100 / 136

M47 User’s Guide - Page 100

Symptom

Reason/Action

Text is blurred.

The paper used is not suitable. Load the correct type
of paper.

See pages 21 and 37.
The paper is damp. Replace with paper from a new
ream.

Missing characters
throughout the length
of the paper.

The drum/toner cartridge is defective/damaged or
there is no more toner inside the cartridge. Replace
with a new drum/toner cartridge.

See page 115.

Text or images are
printed at an angle.

The paper tray guides are not set in the correct
positions. Set the length guide and the right width
guide in the correct positions.

See page 19.

Transparencies and
envelopes are not
printed clearly.

The type of transparency or envelope loaded cannot
be used in this printer. Load the correct type.

See pages 25 and 29.
Check that the paper type on the printer driver or the
control panel is correctly set.

Summary of Contents for M47









































































































































Search results

Summary of Contents for M47

Reviews:

Related manuals for M47

Brands by name

Popular brands

Acom M47, User Manual

Search results

Summary of Contents for M47

Reviews:

Related manuals for M47

Brands by name

Popular brands