Acom M47 User Manual Download Page 94

Page: 94 / 136

M47 User’s Guide - Page 94

Symptom

Explanation

Action

The ATTENTION
light is on.

Is there an error
message displayed
on the control panel?

Check the displayed message
and rectify the error.

See page 103

ATTENTION light is
blinking.

An error that you
cannot rectify yourself
has occurred.

Record the displayed error
message or error code, turn off
the power, pull out the power
plug from the outlet, and then
call for service.

Although no print
job is sent, the
message “Printing”
appears on the
control panel (when
using the parallel
interface).

You turned on the
computer after
turning on the
printer?

Press <Cancel>.
In the future, be sure to turn
on the computer power before
turning on the printer.

Poor print quality.

There may be a
problem with the
image.

Refer to “ When the Print
Quality is Poor” (page 100)

The correct
characters are not
printed (printing
garbage).

This printer is printing
with nonstandard
built-in fonts.

Check the fonts used in the
application. Download the
necessary fonts when using
PostScript.

The printout is
different from what
is displayed on the
screen.

Did you change the
TrueType font settings
to printer fonts?

Change to TrueType font
printing for [Font Substitution]
on the [Setup] tab of the printer
driver.

See the Online Help for the
printer driver

Summary of Contents for M47









































































































































Search results

Summary of Contents for M47

Reviews:

Related manuals for M47

Brands by name

Popular brands

Acom M47, User Manual

Search results

Summary of Contents for M47

Reviews:

Related manuals for M47

Brands by name

Popular brands