M47 User’s Guide - Page 32
Important!
•
Place envelopes in the tray with the printing side up (flap side down).
•
All envelope sizes except C5 should be placed with the top toward the
right side of the printer.
•
C5 envelopes are available in two configurations. C5 with the flap on
the long edge must be placed with the flap toward the right side of the
printer. C5 with the flap on the short edge must be placed with the flap
edge feeding into the printer.
•
Do not load more than 15 envelopes in Tray 1 or more than 80 in Trays 2
through 4.
6. Reinstall the lid and insert the tray firmly into the printer.
7. Using the Operator Panel or Embedded Web Server, select the Envelope
Media Type and correct Media Size for the tray to be used.
8. In the printer driver or the computer application program, select Envelope
as the paper type you wish to use, and select the size and orientation of the
image to be printed.
Summary of Contents for M47
