M47 User’s Guide - Page 39
Advanced Media Control
Auto Tray Change
When an input tray runs out of paper, auto tray changing enables the printer to
switch to another available tray that contains the same Media size and type.
Media Check
Controls whether or not the paper size and media type specified in the print job
must be used to satisfy the print request.
When both Auto Resize and Media Check are enabled, Auto Resize overrides
Media Check in regard to paper size.
To force a specific paper size, disable Auto Resize in the printer menu (under
Admin Setup > Print Menu).
Express Print
To use Express Print, you must disable Media Check. You can use the driver to
do this.
When the printer is in Express Print mode, you can leave the default media
settings as is in the printer, and it will assume the paper you put in the tray and
selected in your driver is the correct size and type for the print job.
This allows you to switch between paper sizes easily without configuring custom
paper sizes at the printer. It is up you to load the correct media in the designated
tray.
Summary of Contents for M47
