Acom M47 User Manual Download Page 97

Page: 97 / 136

M47 User’s Guide - Page 97

Symptom

Explanation

Action

Envelope is
wrinkled.

Envelopes can
get wrinkled
depending on the
type used.

Open cover B of this printer and lift up
the levers at both ends of the fuser unit.
The wrinkles can be reduced.

Important!

After printing the envelope, remember
to return the levers to their original
positions.

Strange noise.

Is the printer
placed on a flat
location?

Place the printer on a stable surface.

Is cover A open?

Close cover A securely.

Is the paper tray
set correctly?

Push the paper tray completely into the
printer.

Are there foreign
objects inside the
printer?

Turn off the power and remove any
foreign objects inside the printer.

If the object cannot be removed unless
the printer is disassembled, contact
service.

Summary of Contents for M47









































































































































Search results

Summary of Contents for M47

Reviews:

Related manuals for M47

Brands by name

Popular brands

Acom M47, User Manual

Search results

Summary of Contents for M47

Reviews:

Related manuals for M47

Brands by name

Popular brands