Acom M47 User Manual Download Page 99

Page: 99 / 136

M47 User’s Guide - Page 99

Symptom

Reason/Action

White dots
appear in black
filled areas.

The paper used is not suitable. Load the correct type of
paper.

See pages 21 and 37.

The drum/toner cartridge is defective or damaged. Replace
with a new drum/toner cartridge.

See page 115.

Printed image
smudges when
rubbed with your
finger. The toner
is not fixed on
the paper. Paper
is smeared with
toner.

The paper loaded in the paper tray does not match the
paper type set on the control panel. Make sure the paper
loaded in the tray matches the type set using the control
panel.

The paper is damp. Replace with paper from a new ream.

The paper used is not suitable. Load the correct type of
paper.

See pages 21 and 37.

The whole sheet
is printed black.

The drum/toner cartridge is defective or damaged. Replace
with a new drum/toner cartridge.

See page 115.

This may be due to breakdown of high voltage power.
Contact service.

Nothing is
printed.

The drum/toner cartridge is defective/damaged or there
is no more toner inside the cartridge. Replace with a new
drum/toner cartridge.

See page 115.

Spots of missing
text.

This may be due to breakdown of high voltage power.
Contact service.
The paper is damp. Replace with paper from a new ream.

The paper used is not suitable. Load the correct type of
paper.

See pages 21 and 37.

Summary of Contents for M47









































































































































Search results

Summary of Contents for M47

Reviews:

Related manuals for M47

Brands by name

Popular brands

Acom M47, User Manual

Search results

Summary of Contents for M47

Reviews:

Related manuals for M47

Brands by name

Popular brands