M47 User’s Guide - Page 23
Configuring Custom Sizes
To print on custom size paper loaded in trays 1 to 4, you must set the paper size
on the control panel. Use the Menu to set Auto-Sense OFF and then set Custom
Size for the intended tray.
You may also need to set it in the printer driver, depending on the paper size.
See the description of Express Print for an easy way to print on various Custom
Sizes.
CautIoN
•
When setting the paper size in the printer driver and control panel, be
sure to specify the same size as the actual paper used. Setting the wrong
size for printing will cause printer failure. This is especially true if you
configure a bigger size when using a narrow width paper.
Note
•
To return to standard paper size settings, select [Auto]. The printer will
automatically detect the size and orientation of the loaded paper.
Summary of Contents for M47
