Accom ASWR8150, Technical Manual

Page: 44 / 236

Dimensions and Physical Installation
Signal Chassis
Figure 2-2, on the facing page, shows the 8150 Signal Chassis
dimensions.
Front View
This view shows the overall width of the Signal Chassis. The chassis fits
in a standard rack (19.00 inches or 483mm wide).
Top View
This view shows the chassis depth from the rack ears to the back panel
(24.75 inches or 629mm). Ensure your rack has adequate depth for cable
installation.
The clearance needed for the front cover is 1.44 inches (37mm).
Side View
The side view shows the chassis height and rack support locations. Rack
space required is 7.0 inches (178mm) or four rack units.
Three rack ear locations are available at the chassis front. The forward
position places the chassis front flush with the rack.
There are three mirror image rear rack support locations available. "L"
brackets (not shown), bolted to the rear rack rails, support the rear of the
chassis by sliding into the rear supports. Install the rear supports as
needed according to the rack depth.
Dimensions and Physical Installation 8150 Technical Guide
2-4
Installation
9100-0212-04 - May 2000