The Engineering menu Input submenu
Effects Loop Inputs
softkey has
two pushknobs that select DVE video and key inputs. Note that there
are independent settings for
DVE 1
and
DVE 2
, to support two pairs of
Aux outputs as described above. Entering the input numbers for the
DVE(s) here tells the 8150 that, when it is performing an Effects Loop,
the re-entry video and key from the DVE is returning at the selected
inputs. The 8150 then compensates for these delayed sources by delaying
its automatic input timing window by the same amount for just those
two inputs. It then routes these two inputs back to the same points in the
M/E Processor or PGM/PST/DSK Processor from which the original
signals left.
If you are using two DVEs, you may also be using a video combiner to
composite the outputs of the two DVEs together before re-entry to the
8150. If this is so, the two DVEs must be locked to the same reference.
However, if DVE 1 is locked to the 8150’s main Aux Ref output, and DVE
2 is locked to the Aux Ref 2 output, they may not be cotimed to each
other. This is why the
Combiner
pushknob appears in this submenu.
Combiner Off
is the default mode; it lets the timing of Aux 1 and 2
outputs be different from that of the Aux 3 and 4 outputs.
Combiner On
forces all Aux outputs to match the delay of those Aux outputs, and
therefore the Aux Ref outputs, used in the current Effects Loop. Note
also that if you are using a video combiner with two DVEs, one pair of
M/E PROCESSOR
PGM/PST/DSK PROCESSOR
KEYER
1
DOWNSTREAM
KEYER
KEYER
2
BGND
MIXER
BGND
MIXER
M/E DVE VID
M/E DVE KEY
DSK DVE VID
DSK DVE KEY
M/E PGM
M/E PVW
DSK PGM
DSK PVW
BGND
BGND
BGND
KEY 2 FILL
KEY 2 CUT
KEY 1 FILL
KEY 1 CUT
BGND A
PRESET
BGND B
PROGRAM
DSK FILL
DSK CUT
8150 SWITCHER
VTR
IN
MONITOR
IN
AUX
REF
DVE
VIDEO
IN
KEY
IN
REF
IN
VIDEO
OUT
KEY
OUT
OTHER SOURCES
IN 1
B
G
ND
A
K
EY
LO
O
P BG
N
D
B
G
ND
B
IN 2
IN 3
IN 4
IN 5
IN 6
IN 7
IN 8
PG
M
PVW
AUX 1
AUX 2
AUX 3
AUX 4
DVE
VIDEO RETURN
DVE
VIDEO RETURN
DVE
KEY RETURN
DVE
KEY RETURN
PGM/PST WIPE
M/E WIPE
OUTPUTS
INPUTS
Generated in the DVE
Figure 5-24 M/E Background Effects Loop
Effects Loop Processing
8150 Technical Guide
5-80
Engineering Setup
9100-0212-04 - May 2000
Summary of Contents for ASWR8150
