ABB Remote I/O RIO600, Installation And Commissioning Manual, Page: 99 / 312

The
OP GENERAL
output is available at LED 5 of the SIM8F module.
The phase segregated as well as general start and operate outputs
STR GENERAL
,
STR PHSA
,
STR PHSB
,
STR PHSC
,
OP GENERAL
,
OP PHSA
,
OP PHSB
and
OP
PHSC
are available over communication.
Signals
Table 60: PHPTOC Output signals
Name Type Description
Op general Boolean General operate signal
Op phsA Boolean Operate signal for phase A
Op phsB Boolean Operate signal for phase B
Op phsC Boolean Operate signal for phase C
Str general Boolean General start signal
Str phsA Boolean Start signal for phase A
Str phsB Boolean Start signal for phase B
Str phsC Boolean Start signal for phase C
Settings
Table 61: PHPTOC Settings
Name Values (Range) Unit Step Default Description
Operation Off
On
- - On Operation Off/On
No. of Start Phases 1 out of 3
2 out of 3
3 out of 3
- - 1 out of 3 Number of phases
required for operate
activation
Start Value 50…2000 A 10 480 Start value for
overcurrent fault
detection
Operate Delay Time 40…60000 ms 10 40 Operate delay time
Absolute Hysteresis 0.0…100.0 A 0.1 3.0 Absolute hysteresis
for current
Table 62: PHPTOC Technical data
Charateristic Value
Operation accuracy Depending on the frequency of the current
measured: f = f
n
±1.5% of the set value
Operate time accuracy (DMT) ±1.0% of the set value or ±20 ms
1MRS757488 H
Section 6
Commissioning
RIO600 91
Installation and Commissioning Manual