PulseTime
: Defines the pulse time duration. When used for direct tripping of circuit
breaker(s) the pulse time duration shall be set to approximately 0.150 seconds in order to
obtain satisfactory minimum duration of the trip pulse to the circuit breaker trip coils.
Used only for
ModeOutputx
:
Pulsed
.
OnDelay
: Used to prevent output signals to be given for spurious inputs. Normally set to
0 or a low value. Used only for
ModeOutputx
:
Steady
.
OffDelay
: Defines a minimum on time for the outputs. When used for direct tripping of
circuit breaker(s) the off delay time shall be set to approximately 0.150 seconds in order
to obtain a satisfactory minimum duration of the trip pulse to the circuit breaker trip coils.
Used only for
ModeOutputx
:
Steady
.
ModeOutputx
: Defines if output signal
OUTPUTx
(where x=1-3) is
Steady
or
Pulsed
. A
steady signal follows the status of the input signals, with respect to
OnDelay
and
OffDelay
. A pulsed signal will give a pulse once, when the
Outputx
rises from 0 to 1.
11.3
Configurable logic blocks
11.3.1
Identification
Function description
IEC 61850
identification
IEC 60617
identification
ANSI/IEEE C37.2
device number
OR Function block
OR
-
-
Function description
IEC 61850
identification
IEC 60617
identification
ANSI/IEEE C37.2
device number
Inverter function block
INVERTER
-
-
Function description
IEC 61850
identification
IEC 60617
identification
ANSI/IEEE C37.2
device number
PULSETIMER function block
PULSETIMER
-
-
Function description
IEC 61850
identification
IEC 60617
identification
ANSI/IEEE C37.2
device number
Controllable gate function block
GATE
-
-
Function description
IEC 61850
identification
IEC 60617
identification
ANSI/IEEE C37.2
device number
Exclusive OR function block
XOR
-
-
Section 11
1MRK 511 286-UUS A
Logic
272
Application manual
Summary of Contents for REC650 ANSI
