Index
Product manual 2CKA001473B9679
│389
Step controller — RH threshold 3 ...................... 193
Step controller — Switch command above threshold 1
........................................................... 188
Step controller — Switch command above threshold 2
........................................................... 191
Step controller — Switch command above threshold 3
........................................................... 194
Step controller — Switch command below threshold 1
........................................................... 185
Step controller — Switching command at measurement
failure ................................................... 194
Step controller — Value above threshold 1 (byte) ... 188
Step controller — Value above threshold 1 (scene) . 189
Step controller — Value above threshold 2 (byte) ... 192
Step controller — Value above threshold 2 (scene) . 192
Step controller — Value above threshold 3 (byte) ... 197
Step controller — Value above threshold 3 (scene) . 197
Step controller - Value at measurement value failure
(byte) ................................................... 197
Step controller - Value at measurement value failure
(scene) .................................................. 198
Step controller — Value below threshold 1 (byte) ... 186
Step controller — Value below threshold 1 (scene) . 186
Step size (%) ............................................... 247
Step size for step-wise dimming (%) ................... 215
Summer compensation ................................... 148
Summer compensation - (Lower) Starting temperature
for summer compensation (x 0.1°C) ............... 149
Summer compensation — Offset of the set-point
temperature for the entry into summer
compensation (x 0.1°C) .............................. 149
Summer compensation — Offset of the set-point
temperature for the exit from summer
compensation (x 0.1°C) .............................. 150
Summer compensation — Summer compensation ... 148
Support rings ............................................... 30
Surface-mounted installation ............................ 43
Switching On and Off ...................................... 57
Switch-off delay .......................................... 314
Switch-off pre-warning .................................. 315
T
Target group ................................................ 20
Technical data ............................................. 31
Temperature .............................................. 330
Application .................................................................... 290
Temperature difference for sending within the cycle
time ..................................................... 291
Temperature limiter ..................................... 136
Temperature limit of additional cooling stage ............... 140
Temperature limit of additional cooling stage - Hysteresis
................................................................................. 140
Temperature limit of additional cooling stage - Integral
component of the PI controller ................................. 140
Temperature limit of additional cooling stage - Limit
temperature ............................................................. 140
Temperature limit of additional heating stage ............... 138
Temperature limit of additional heating stage - Hysteresis
................................................................................. 138
Temperature limit of additional heating stage - Integral
component of the PI controller .................................138
Temperature limit of cooling ..........................................138
Temperature limit of cooling - Limit temperature ...........139
Temperature limit of heating - Hysteresis .....................136
Temperature limit of heating - Integral component of the
PI controller ..............................................................137
Temperature limiter - Temperature limit of additional
heating stage - Limit temperature ................. 138
Temperature limiter - Temperature limit of cooling -
Hysteresis .............................................. 139
Temperature limiter - Temperature limit of cooling -
Integral component of the PI controller .......... 139
Temperature limiter - Temperature limit of heating
.......................................................... 136
Temperature limiter - Temperature limit of heating -
Limit temperature .................................... 136
Temperature reading — Adjustment value for internal
temperature measurement (x 0.1°C) .............. 132
Temperature reading — Control value for fault (0 -
255) ..................................................... 133
Temperature reading — Cyclic sending of actual
temperature (min) .................................... 131
Temperature reading — Difference of value for sending
the actual temperature (x 0.1°C) .................. 131
Temperature reading — Inputs of temperature reading
.......................................................... 129
Temperature reading — Inputs of weighted
temperature reading ................................. 130
Temperature reading — Monitoring of temperature
reading ................................................. 132
Temperature reading — Monitoring time for
temperature reading ................................. 132
Temperature reading — Operating mode for fault .. 133
Temperature reading — Weighting of external
measurement (0 to 100%) ........................... 130
Temperature reading — Weighting of external
measurement 2 (0 to 100%) ......................... 131
Temperature reading — Weighting of internal
measurement (0 to 100%) ........................... 130
Temperature sensor - Actual temperature ........... 373
Temperature sensor - Actual temperature for
temperature adjustment ............................ 373
Temperature unit .......................................... 74
Threshold between Zone 2 and 3 (%) ................. 282
Threshold between Zone 3 and 4 (%) ................. 283
Time for switch-off pre-warning ....................... 316
U
Updating options ........................................... 51
Use object for switchover time .......................... 65
Use of automatic enable/blockage ...................... 64
V
Value ....................................................... 330
Value (%) ................................................... 330
Value 1/Value 2 ............................... 85, 234, 239
Value 1/value 2 for falling edge ....................... 245
Value 1/value 2 for rising edge ........................ 244
Value 2 ....................................................... 86