Description of application and parameters
"Relative humidity" application
Product manual 2CKA001473B9679
│195
11.6.37 Step controller — Priority at measurement failure
Options:
End priority
OFF with priority
ON with priority
If the internal or external measurement malfunctions or fails, a defined switching command can
be sent through this parameter.
Notice
The parameter is available only when parameter "Control value output format" is
set on "Priority".
11.6.38 Step controller — Percent above threshold 3
Options:
0 … 100 %
The parameter defines which state should be sent after threshold value 3 is exceeded.
Notice
The parameter is available only when parameter "Control value output format" is
set on "Percent".
Notice
The parameter is available only when parameter "Controller type" is set on
"Three-stage".