Description of application and parameters
Application "CO2 sensor"
Product manual 2CKA001473B9679
│170
11.5.41 Behaviour at setting the blockage
Options:
Send nothing
Send value
If the sensor is blocked after the receipt of an ON telegram, the following parameters can be
selected:
■
Do not send:
– The sensor sends no value during blockage.
■
Send current value:
– The sensor sends its current value during blockage also when it has not changed.
Notice
The parameter is available only when parameter "Blocking object" is set on
"Active".
11.5.42 Settings — Value for blockage
Options:
0…64
Fixes the status for activating the blockage.
Notice
The parameter is available only when parameter "Blocking object" is set on
"Active".
11.5.43 PI controller - Blocking object
Options:
Inactive
Active
The complete function of the CO2 sensor can be blocked using this parameter and with a 1 via
the corresponding communication object. Deactivation takes place by setting a value of 0.
Notice
The parameter is available only when parameter "CO2 controller type" is set on
"PI".
