Description of application and parameters
"Relative humidity" application
Product manual 2CKA001473B9679
│192
11.6.30 Step controller — Percent above threshold 2
Options:
0 … 100 %
The parameter defines which state should be sent after threshold value 2 is exceeded.
Notice
The parameter is available only when parameter "Control value output format" is
set on "Percent".
Notice
The parameter is available only when parameter "Controller type" is set on
"Two-stage" or "Three-stage".
11.6.31 Step controller — Value above threshold 2 (byte)
Options:
0 … 255
The parameter defines which state should be sent after threshold value 2 is exceeded.
Notice
The parameter is available only when parameter "Control value output format" is
set on "Byte".
Notice
The parameter is available only when parameter "Controller type" is set on
"Two-stage" or "Three-stage".
11.6.32 Step controller — Value v of threshold 2 (scene)
Options:
0 … 64
The parameter defines which state should be sent after threshold value 2 is exceeded.
Notice
The parameter is available only when parameter "Control value output format" is
set on "Scene".
Notice
The parameter is available only when parameter "Controller type" is set on
"Two-stage" or "Three-stage".