Description of application and parameters
Application "Function block x"
Product manual 2CKA001473B9679
│248
11.7.12 Application - 1-button light scene extension unit with memory function
The application can be used to call up and save one of 64 possible light scenes with a press of
the button.
The following communication object is available:
■
"Sx: light scene number"
The fixed light scene is called up with a press of the button. A save command for the light scene
can be sent with a long press of the same button.
In each case, the application makes a separate set of parameters and communication objects
available in function block x for both buttons. The second button of each function block can be
occupied with an additional button function.
Note
The parameters for application "1-button light scene extension unit with memory
function" can be called up via
general parameters
.
Note
The number (S1 - Sx) of the object depends on the function block and the button
number.
11.7.12.1
Duration of long operation
Options:
Setting option from 00.300 to 10.000 (ss.fff)
The application can differentiate between a normal and a long press of the button. At a normal
press of the button a 1-byte value is sent on the bus via communication object "Sx: light scene
number". At a long press of the button a memory bit is sent in addition to the light scene
number.
The parameter is used to specify the time after which a long button press is recognised. A
typical value for a long press of the button is 5 seconds.
