Operation
Product manual 2CKA001473B9679
│58
9.4.2
Adjust temperature
Notice
– The set-point temperature appears automatically on the display. The device
must be switched on for this to happen.
– The following illustration shows an example of a configuration.
– The function can be individually parameterized on one of the button pairs.
Au to
°C
°C
ECO
6
1
The setpoint temperature is adjusted with
the buttons [1] and [6].
The current setpoint temperature is
shown in the display.
– Press button [1] to increase the
setpoint temperature.
– Press button [6] to reduce the
setpoint temperature.
The new setpoint temperature is
displayed.
Fig. 32: Setting the temperature