Description of application and parameters
Application "General functions"
Product manual 2CKA001473B9679
│305
11.9.4.9
Value of the output object for logic true
Options:
Output is set to 1
Defined via output default value true
■
Output is set on 1:
– As soon as the logic function is fulfilled, a logical "1" is present on the output. This
equally applies when the "Object type output" parameter is set on "1byte".
■
Defined via output default value true:
– The value that is present on the output when the logic has been met, can be set via
parameter "Output default value true".
The parameter is used to specify the value of the output object in the logic status "True".
11.9.4.10
Output default value true
Options:
True = 0
True = 1
■
True = 0:
– When a logic has been met, value "0" is present at communication object "GFx: output".
■
True = 1:
– When a logic has been met, value "1" is present at communication object "GFx: output".
The parameter is used to specify the value that is sent via the 1-bit communication object "GFx:
output" when a condition (true) has been met.
Note
The parameter can only be set if the "Object type output" parameter is set on "1
bit" and parameter "Value of the output object for logic true" is set on "Defined
via output default value true".
11.9.4.11
Output default value true
Options:
Setting option from 0 to 255
The parameter is used to set the value that is sent via the 1-byte communication object "GFx:
output" when a condition (true) has been met.
Note
The parameter can only be set if the "Object type output" parameter is set on "1
byte" and parameter "Value of the output object for logic true" is set on "Defined
via output default value true".
