ABB ACS850 series, Firmware Manual

Page: 79 / 260

Parameters 79
09.20 Option slot1 Displays the type of the optional module in option slot 1.
0 = No option, 1 = No comm, 2 = Unknown, 3 = FEN-01,
4 = FEN-11, 5 = FEN-21, 6 = FIO-01, 7 = FIO-11,
8 = FPBA-01, 9 = FPBA-02, 10 = FCAN-01, 11 = FDNA-01,
12 = FENA-01, 13 = FENA-02, 14 = FLON-01,
15 = FRSA-00, 16 = FMBA-01, 17 = FFOA-01,
18 = FFOA-02, 19 = FSEN-01, 20 = FEN-31, 21 = FIO-21,
22 = FSCA-01, 23 = FSEA-21 1 = 1
09.21 Option slot2 Displays the type of the optional module in option slot 2. See
signal
09.20 Option slot1 .
1 = 1
09.22 Option slot3 Displays the type of the optional module in option slot 3. See
signal
09.20 Option slot1 .
1 = 1
10
10 Start/stop Start/stop/direction etc. signal source selections.
10.01 Ext1 start func Selects the source of start and stop commands for external
control location 1 (EXT1).
Note: This parameter cannot be changed while the drive is
running.
Not sel No start or stop command sources selected. 0
In1 The source of the start and stop commands is selected by
parameter
10.02 Ext1 start in1 . The state transitions of the
source bit are interpreted as follows:
1
3-wire The sources of the start and stop commands is selected by
parameters
10.02 Ext1 start in1 and 10.03 Ext1 start in2 . The
state transitions of the source bits are interpreted as follows:
2
FBA The start and stop commands are taken from the fieldbus. 3
D2D The start and stop commands are taken from another drive
through the D2D (Drive-to-drive) Control Word. 4
In1F In2R The source selected by 10.02 Ext1 start in1 is the forward
start signal, the source selected by 10.03 Ext1 start in2 is the
reverse start signal.
5
In1St In2Dir The source selected by 10.02 Ext1 start in1 is the start signal
(0 = stop, 1 = start), the source selected by 10.03 Ext1 start
in2 is the direction signal (0 = forward, 1 = reverse).
6
No. Name/Value Description FbEq
State of source
(via par
10.02 )
Command
0 -> 1 Start
1 -> 0 Stop
State of source 1
(via par.
10.02 )
State of source 2
(via par.
10.03 )
Command
0 -> 1 1 Start
Any 1 -> 0 Stop
Any 0 Stop
State of source 1
(via par.
10.02 )
State of source 2
(via par.
10.03 )
Command
0 0 Stop
1 0 Start forward
0 1 Start reverse
1 1 Stop