ABB ACS850 series, Manual

Page: 112 / 370

112 Parameters
No. Name/Value Description FbEq
Bit Name Value Information Log. Par.
(continued)
9
Jogging 1 1 Activate Jogging 1. See section Jogging on page 64 .
OR 10.07
0 Jogging 1 disabled.
10 Jogging 2 1 Activate Jogging 2. See section Jogging on page 64 .
OR 10.08
0 Jogging 2 disabled.
11 Remote
cmd 1 Fieldbus control enabled.
– –
0 Fieldbus control disabled.
12 Ramp out
0 1 Force output of Ramp Function Generator to zero. The
drive ramps to a stop (current and DC voltage limits are
in force).
– –
0 No action.
13 Ramp hold 1 Halt ramping (Ramp Function Generator output held).
– –
0 No action.
14 Ramp in 0 1 Force input of Ramp Function Generator to zero.
– –
0 No action.
15 Ext1 / Ext2 1 Switch to external control location EXT2.
OR 12.01
0 Switch to external control location EXT1.
16 Req
startinh 1 Activate start inhibit.
– –
0 No start inhibit.
17 Local ctl 1 Request local control for Control Word. Used when the
drive is controlled from a PC tool or panel or local
fieldbus.
• Local fieldbus: Transfer to fieldbus local control
(control through Control Word or reference).
Fieldbus steals the control.
• Panel or PC tool: Transfer to local control.
– –
0 Request external control.
18 FbLocal ref 1 Request fieldbus local control.
– –
0 No fieldbus local control.
19…27 Reserved
28
CW B28 Freely programmable control bits. See parameters
50.08 … 50.11 .
– –
29 CW B29
30 CW B30
31 CW B31