ABB ACQ580, Firmware Manual

Page: 194 / 422

190 Parameters
Hysteresis Action is taken whenever the signal rises above the value
defined by the limit + 0.5
· hysteresis range ( 32.51
Supervision 5 hysteresis ). The action is deactivated when the
signal falls below the value defined by the limit - 0.5 ·
hysteresis range.
7
32.46 Supervision 5
action Selects whether the drive generates a fault, warning or
neither when the value monitored by signal supervision 5
exceeds its limits.
Note: This parameter does not affect the status indicated by
32.01 Supervision status .
No action
No action No warning or fault generated. 0
Warning Warning A8B4 ABB Signal supervision 5 is generated. 1
Fault Drive trips on fault 80B4 Signal supervision 5 . 2
Fault if running Drive trips on fault 80B0 Signal supervision 1 if the motor is
running.
3
32.47 Supervision 5
signal Selects the signal to be monitored by signal supervision
function 5.
For the available selections, see parameter
32.07
Supervision 1 signal .
Zero
32.48 Supervision 5 filter
time Defines a filter time constant for the signal monitored by
signal supervision 5. 0.000 s
0.000 … 30.000 s Signal filter time. 1000 = 1 s
32.49 Supervision 5 low Defines the lower limit for signal supervision 5. 0.00
-21474836.00…
21474836.00 Low limit. -
32.50 Supervision 5 high Defines the upper limit for signal supervision 5. 0.00
-21474836.00…
21474836.00 Upper limit. -
32.51 Supervision 5
hysteresis Defines the hysteresis for the signal monitored by signal
supervision 5. 0.00
0.00…100000.00 Hysteresis. -
32.55 Supervision 6
function Selects the mode of signal supervision function 6. Determines
how the monitored signal (see parameter
32.57 ) is compared
to its lower and upper limits ( 32.59 and 32.50 respectively).
The action to be taken when the condition is fulfilled is
selected by
32.56 .
Disabled
Disabled Signal supervision 6 not in use. 0
Low Action is taken whenever the signal falls below its lower limit. 1
High Action is taken whenever the signal rises above its upper
limit. 2
Abs low Action is taken whenever the absolute value of the signal falls
below its (absolute) lower limit. 3
Abs high Action is taken whenever the absolute value of the signal
rises above its (absolute) upper limit. 4
Both Action is taken whenever the signal falls below its low limit or
rises above its high limit. 5
Abs both Action is taken whenever the absolute value of the signal falls
below its (absolute) low limit or rises above its (absolute) high
limit. 6
No. Name/Value Description Def/FbEq16