Start-up, control with I/O and ID run 23
If the control modes is scalar, select
Control
mode
and press
(
Select
) (or
) and
continue to the next step.
Select
Vector control
and press
(
Select
)
(or ).
Warning message
Identification run
is shown
for a moment.
Check the motor speed limits. The following must
be true:
• Minimum speed < 0 rpm
• Maximum speed = motor rated speed.
Check the motor current as well as torque limits.
The following must be true:
• Maximum current >
I
HD
• Maximum torque > 50%.
Summary of Contents for ACQ580
