Start-up, control with I/O and ID run 15
1 – First start assistant guided settings:
Language, date and time, and motor nominal values
Have the motor or pump name plate data at hand.
Power up the drive.
The First start assistant guides you through the
first start-up.
The assistant begins automatically. Wait until the
control panel enters the view shown on the right.
Select the language you want to use by
highlighting it (if not already highlighted) and
pressing
(
OK
).
Note:
After you have selected the language, it
takes a few minutes to download the language file
to the control panel.
Select
Start set-up
and press
(
Next
).
Set the date and time as well as date and time
display formats.
• Go to the edit view of a selected row by
pressing .
• Scroll the view with
and
.
Go to the next view by pressing
(
Next
).
To change a value in an edit view:
• Use
and
to move the cursor left and
right.
• Use
and
to change the value.
• Press
(
Save
) to accept the new setting,
or press
(
Cancel
) to go back to the
previous view without making changes.
Summary of Contents for ACQ580
